No products in the basket.
QuickJacks for Hard Surfaces Kit for 10 x 8 shed
An adjustable base system for building on hard surfaces.
Create your own frame out of 2 inch wide timber to suit your building.
This kit Includes:
- 4 x QuickJacks with corner brackets
- 5 x QuickJacks with inline brackets
- 36 x Screws
- Kit does not include any timber
£161.55
Additional Information:
Adjustable steel feet for supporting timbers buildings on hard surfaces such as tarmac, concrete and hard core. Superb for lightweight garden buildings and decking.
- Up to 80mm of adjustment for levelling
- Quick and Easy to install
- Elevates your building off the ground away from moisture
- Improves the ventilation of your floor timbers keeping them dry and rot free
- System can be used to anchor your building
- 6mm thick steel brackets
- All brackets are bright zinc plated
- System comes with 10 year warranty
- Maximum load of 150kg per unit
- Weight 1.5kg
| QBS Brand | QuickJack Hard Surfaces |
|---|
Steven (verified owner) –
Would be useful to know the size of spanner required for the nuts. Corner units are difficult to tighten as space is restricted. Overall a good system, easy to level on a very uneven patio, which saved me digging it up ! Seems very sturdy and supports my 10×8 and contents adequately. In my view, better than the plastic variants others sell.
Ian Sherer (verified owner) –
OK apart from one problem. the length of the threads means that 4 x 2 timbers are not deep enough otherwise a top base cannot be attached. I have a base where some of the top timbers are sitting on the thread rather than the frame. I had to cut a hole in the top timbers of the middle quickjack so it would screw to the frame.
Mark Wilson (verified owner) –
good quality and easy to use
A J Womack (verified owner) –
One minor gripe, the corner base plate is a little cramped when adjusting the locking nut.
Tip, To ease adjustment run the nuts up and down a few times and a spray of lubricant will clear any excess galvanising.
chris r. (verified owner) –
Top kit if part. Fast and robust.
Tim Bettesworth (verified owner) –
Excellent
Neil H. (verified owner) –
I’d looked at a lot of options to re-level my pent shed. Though first of they seemed expensive, but in reality they’re not. VERY heavy units and super easy to fit and use. Will easily outlive my shed (and me). Quite a lot of adjustment height, which I needed but minimum height is about 40mm, so my “raised” end is that much higher…but not a drama.